Three Methods: If you're trying to install Windows on a laptop that doesn't have a DVD drive, or you want a portable installation tool that you can use on a lot of computers, creating a bootable USB Windows installation drive may be the answer you're looking for. All modern versions of Windows can be easily installed from a USB drive, as long as you have a valid Windows product key. You'll need a USB flash drive that has at least 4 GB of storage.
Hp raid controller software. The server is running x3 300GB SSD drives. I am currently running server 2012 R2 on the free vision of VMware.
For Windows 7 and Vista, you'll need an installation disc or an ISO image file of the installation disc as well. Download the Windows 10 Media Creation Tool.
This utility allows you to turn your flash drive into a Windows 10 installation drive. You don't need to be using Windows 10 to use this tool. You can download this tool for free from Microsoft at microsoft.com/en-us/software-download/windows10.
Nearly all newer computers are 64-bit, but you can check to determine what version of Windows you are currently running in your System Properties window. For more details. You'll need to have administrator access to use this tool. Run the media creation tool and select 'Create installation media for another PC'. You'll be asked to select what version of Windows 10 you want to download. If you are upgrading from a Home or Starter version of Windows 7 or 8, select 'Windows 10 Home'. If you are upgrading from a Professional or Ultimate version of Windows 7 or 8, select 'Windows 10 Pro'.
If you aren't upgrading from Windows 7 or 8, select whichever version of Windows you purchased a product key for. Upgrading from Windows 7 or 8 is free until July 2016. Upgrade a Windows 7 or 8 computer to register before installing Windows 10 (upgrading only). If you're creating this flash drive to install Windows 10 on a computer that is currently running Windows 7 or 8 in order to take advantage of the free upgrade, you must use the Upgrade utility first before performing a clean install.
This registers your computer with Microsoft to make up for the fact that you don't have a product key. If you don't upgrade first, you won't be able to activate Windows 10 unless you purchase a product key or reinstall your old version of Windows and try again. Run the Windows 10 Media Creation Tool on the computer that you want to upgrade to Windows 10. Select 'Upgrade this PC now' and follow the prompts to install Windows 10. You won't lose any of your files. After upgrading to Windows 10, you can use your new flash drive to perform a clean install at any time on that PC. Boot your computer from the USB drive.
The process for this varies a lot depending on the computer that you are using. Traditionally, you would open the BIOS menu and change the order of drives in the BOOT menu. Newer computers use UEFI instead of BIOS, which needs to be accessed in a special way if you're using Windows 8. Reboot your computer and look for the BIOS or BOOT menu key when the manufacturer logo appears. Press this key to open the menu and change your boot order. The setup key is typically.
Contents. Summary The latest version of RouterOS (starting from v3.0rc5) has support for booting from USB devices added. This new feature allows you to test how your PC would work as a router.
Also it could be a good option to run the RouterOS from USB with the newest version to test out how well it is performing. It means that you can install the RouterOS on the USB flash/drive. Installation To install the RouterOS on the USB you can use CD-Install or Netinstall from the latest versions of the RouterOS (starting form v3.0rc5). Also it is possible to attach that USB drive to a Windows computer and copy the RouterOS installation files using Netinstall to the USB drive and when booting this USB drive it would install the RouterOS on it.
Media Capabilities with Motherboards and Laptops Since there are lot of USB media types, below are notes for most of that which have been tested. USB hard drive USB Flash Stick On Gigabyte GA-8I945P-G-RH motherboard that are using (945 chipset) you need to go in the BIOS and specify to boot the from the USB-HDD. If you have another hard drive installed in the same PC then you should also specify the boot priority. For the Gigabyte motherboard in the BIOS it gives two options regular harddrive that you have installed and Bootable add-in drives.
You should specify the Bootable add-in cards. After the first reboot if it didn't boot from the usb drive, you need to reboot once more and go into the same section and there you will see a new boot option - the usb flash drive name. USB Card Readers Not only USB flash/drives can be uses, also USB card readers can be used. In these USB Card readers you can plug any media (CF, SD, xD, etc) and use that as a bootable device to run RouterOS. But there could be problems with these Card readers as sometimes it is not recognized as a bootable device in BIOS - such thing happened on the Intel DG965WH motherboard (965 chipset), but it worked on Gigabyte GA-8I945P-G-RH motherboard (945 chipset).
It could be because of the motherboard BIOS and that shouldn't affect the regular USB flash/drives. Additional Notes The booting support for the USB drives is the part of the BIOS, so if your motherboards BIOS doesn't allow to boot from that drive you might try to upgrade the BIOS of the motherboard.
Note: RouterOS installation will erase all data on your HDD, it will only work as the only operating system in your PC. Remove any drives that you don't want to be erased CD Install Requirements Router. x86 box with hard drive. CD-ROM Additional PC. CD-ROM.
CD burning application. MikroTik RouterOS CD installation ISO image CD Install Example Prepare MikroTik RouterOS CD Installation Disk 1. Download CD installation Image from MikroTik, 2. Burn ISO image to disk, you need PC with CD-ROM and application to write ISO files to CD. For Linux (the latest Ubuntu release) you can use built-in application. Mouse right-click on the.iso file and specify 'Write to Disk'. You got MikroTik RouterOS installation disk after process is finished.
Router Preconfiguration 3. Switch on the x86 box, where you want to install MikroTik RouterOS, it should be with CD-ROM as well. Put MikroTik RouterOS installation disk to CD-ROM and set to boot from CD-ROM in BIOS settings, 4.
X86 will boot from MikroTik RouterOS installation disk and should offer you to select the RouterOS to install, Package Selection 5. Select the packages you want to install, it is possible to select all packages with a or minimum with m, then Press i to install the RouterOS. Installation 6. If you have previous installation of the RouterOS and want to reset the configuration, then answer no for the question 'Do you want to keep old configuration?' And click y to proceed, 7. You will the process of the packages installation. Router will ask for the reboot after installation is finished, Post Installation procedures 8.
MikroTik RouterOS is successfully installed, do not forget to eject CD installation disk and set PC to boot from Hard Drive, 9. MikroTik RouterOS is booted and you are ready to login. Default login is admin without any password, 10. The last of the installation to license the router, use the software-id to purchase the, Reset RouterOS configuration with CD Intstall To reset the RouterOS configuration with CD Install, follow the procedure and on the, set no for the answer 'Do you want to keep old configuration?'
If you still cannot retrieve the access to your MikroTik router or RouterOS devices after you tried to, you can reinstall the RouterOS on your router with NetInstall to start everything from fresh. NetInstall is a program that runs on Windows computer that allows you to install MikroTiK RouterOS onto a PC or onto a RouterBoard via an Ethernet network. NetInstall is also used to re-install RouterOS in cases where the the previous install failed, became damaged or access passwords were lost. Before you starts, download and the latest RouterOS (NPK file) of your router. First of all, you have to assign a static IP address to your computer, the method is different in Windows XP, Windows Vista, and Windows 7, you can refer to the following link and follow accordingly to setup for static IP, 10.0.0.1 and subnet mask, 255.255.255.0, leave everything else blank. After that, you will see the properties as below.
Chrome Os Install Usb
The Network Connection Details as below. You should disable any firewall software on your computer before proceed. If the following steps are failed later, you should disable all other network adapters (including Ethernet and wireless), leaving only the one you are using to connect to your router to be re-installed, then redo the steps from here onward. Run NetInstall which you downloaded at the beginning on your computer. Press “Net Booting” button. Tick “Boot Server Enabled” and enter IP address, 10.0.0.2.
Install Os On Usb Drive
Press “OK” to complete. While your router power is turned off, hold the reset button and do not release. Turn on the device power and keep holding the button even you find the USER LED labelled with “ACT” starts flashing. After the LED stops flashing and turned off, you can release the button. Wait for a few minutes for the MAC Address of the router to appear in the Routers/Drives list of on NetInstall.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |